Hold the bottom piece of the cable cover and align the four tabs with the four slots on the
3
computer's back panel.
Insert the tabs into the slots and slide the piece toward the diagnostic lights (see the illustration)
4
until the cable cover is securely positioned.
Install a security device in the security cable slot (optional).
5
Removing the Cable Cover
If a security device is installed in the security cable slot, remove the device.
1
Press on the release button, grasp the cable cover, and slide the cover to the left until it stops, and
2
then lift the cable cover up and away.
1
2
1
cable cover
2
security cable slot
1
release button
1
Ultra Small Form Factor Computer
209