Ultra Small Form Factor Computer; Replacing The Chassis Intrusion Switch; Resetting The Chassis Intrusion Detector - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

Ultra Small Form Factor Computer

Replacing the Chassis Intrusion Switch

Gently slide the chassis intrusion switch into its slot and reconnect the cable to the system board.
1
Replace the computer
2
Attach the computer stand, if it is used.
3

Resetting the Chassis Intrusion Detector

Turn on (or restart) your computer.
1
When the blue DELL™ logo appears, press <F2> immediately.
2
If you wait too long and the operating system logo appears, continue to wait until you see the
Microsoft
Select the Chassis Intrusion option and then press the left- or right-arrow key to select Reset.
3
Change the setting to On, On-Silent, or Disabled.
NOTE:
Press <Alt><b> to restart the computer and implement your changes.
4
24
Chassis Intrusion Switch
cover.
® ®
Windows desktop. Then shut down your computer and try again.
The default setting is On-Silent.