Chassis Intrusion Switch; Removing The Chassis Intrusion Switch; Mini Tower Computer - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

Chassis Intrusion Switch

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.

Removing the Chassis Intrusion Switch

Follow the procedures in
1
Disconnect the chassis intrusion switch cable from the system board.
2
Note the routing of the chassis intrusion cable as you remove it from the chassis. Chassis hooks
may hold the cable in place inside the chassis.
Using a flat blade screwdriver, gently slide the chassis intrusion switch out of its slot, and
3
remove the switch and its attached cable from the computer.

Mini Tower Computer

"Before You Begin."
Chassis Intrusion Switch
21