Scanning Using Twain Or Wia; Configuring Settings Before Sending; Scanning Document Using Application - Kyocera ECOSYS M2040dn Operation Manual

Operation on the Machine > Scanning using TWAIN or WIA

Scanning using TWAIN or WIA

Configuring Settings before Sending

Before sending an document, confirm that TWAIN/WIA driver is installed on a computer and the settings are configured.
Setting TWAIN Driver (page 2-40)
Setting WIA Driver (page 2-42)

Scanning Document Using Application

This subsection explains how to scan an original using TWAIN. The WIA driver is used in the same way.
1
2
3
4
Display the screen.
1
Activate the TWAIN compatible application software.
2
Select the machine using the application and display the dialog box.
NOTE
For selecting the machine, see the Operation Guide or Help for each application
software.
Configure the scan settings.
Select scanning settings in the dialog box that opens.
NOTE
For the settings, refer to Help in the dialog box.
Place the originals.
Loading Originals (page 5-2)
Scan the originals.
Click the [Scan] button. The document data is scanned.
5-20