Laser And Led Safety Guidelines And Warnings For The M120 Router; General Laser Safety Guidelines For The M120 Router - Juniper M120 Hardware Manual

M120 Multiservice Edge Router Hardware Guide
Related
Documentation

Laser and LED Safety Guidelines and Warnings for the M120 Router

General Laser Safety Guidelines for the M120 Router

Related
Documentation
200
Attention Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10
degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 189
Maintenance and Operational Safety Warnings for M Series, MX Series, and T Series
Routers on page 203
General Laser Safety Guidelines for the M120 Router on page 200
M120 Laser and LED Safety Warnings on page 201
Physical Interface Cards (PICs) with single-mode optical interfaces are equipped with
laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and
Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
When working around PICs, observe the following safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
M120 Laser and LED Safety Warnings on page 201
Copyright © 2010, Juniper Networks, Inc.