Configuring Lpr Printers - Novell NETWARE 6-DOCUMENTATION Manual

Configuring LPR Printers

64
Novell Distributed Print Services Administration Guide
UNIX, Macintosh, and other LPR clients can print to iPrint printers using
LPR.
IMPORTANT:
In order for LPR to work, the printer agent name cannot contain
spaces. If it does, you will need to rename the printer agent or select a different
printer.
1
In iManage, click iPrint Management > Manage Printer.
2
Browse to and select the printer you want to enable LPR printing for.
3
Click Client Support > LPR Support.
4
Check the Enable LPR/LPD Client Support check box.
The LPR Host and LPR Printer/Queue fields display information required
when setting up printing for Macintosh, UNIX, or other LPR clients.
LPR Host: The server name where the Print Services Manager is
running.
LPR Printer/Queue:The same as the printer agent's name. The printer
agent name cannot have any spaces in its name; otherwise, LPR will not
work properly.
5
(Optional) Enable the following options:
Filter All LF to CRLF and Append FF to Jobs: Checking this check
box changes bytes in the LPR data stream of all incoming LPR print jobs
from Line Feeds to Carriage Returns with Line Feeds and appends a Form
Feed to the end of the print job. Typically, these changes are made at the
LPR client; however, if you are sure of your users' configurations, you can
implement this option.
Address Ranges: Add an address range only if you want to restrict access
to this printer to LPR clients within the address range. When the list is
empty, all addresses are allowed to print (default).
6
Click Apply or OK to update the printer settings.