System Access Configuration; Management Networks Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

System Access configuration

Command: /cfg/sys/access
[System Access Menu]
mgmt
user
http
https
wport
snmp
tnport
tport
cur
The following table describes the System Access Configuration menu options.
Table 94 System Access Configuration Menu options
Command
mgmt
user
http disable|enable
https
wport <TCP port
number>
snmp disable|read-
only|read-write
tnport <TCP port
number>
tport <TFTP port
number>
cur

Management Networks configuration

Command: /cfg/sys/access/mgmt
[Management Networks Menu]
add
rem
cur
The following table describes the Management Networks Configuration menu options. You can configure up to 10
management networks on the switch.
Table 95 Management Networks Configuration menu options
Command
add <IP address> <IP mask>
rem <IP address> <IP mask>
cur
- Management Network Definition Menu
- User Access Control Menu (passwords)
- Enable/disable HTTP (Web) access
- HTTPS Web Access Menu
- Set HTTP (Web) server port number
- Set SNMP access control
- Set Telnet server port number
- Set the TFTP Port for the system
- Display current system access configuration
Description
Displays the Management Configuration Menu.
Displays the User Access Control Menu.
Enables or disables HTTP (Web) access to the Browser-based Interface. It is enabled by
default.
Displays the HTTPS Menu.
Sets the switch port used for serving switch Web content. The default is HTTP port 80.
Disables or provides read-only/write-read SNMP access.
Sets an optional telnet server port number for cases where the server listens for telnet sessions
on a non-standard port.
Sets an optional telnet server port number for cases where the server listens for TFTP sessions
on a non-standard port.
Displays the current system access parameters.
- Add mgmt network definition
- Remove mgmt network definition
- Display current mgmt network definitions
Description
Adds a defined network through which switch access is allowed
through Telnet, SNMP, RIP, or the browser-based interface. A range
of IP addresses is produced when used with a network mask
address. Specify an IP address and mask address in dotted-decimal
notation.
Removes a defined network, which consists of a management
network address and a management network mask address.
Displays the current management networks parameters.
Configuration Menu 104