Acl Meter Configuration; Acl Re-Mark Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

ACL Meter configuration

Command: /cfg/acl/acl <1-762>/meter
[Metering Menu]
cir
mbsize
enable
dpass
reset
cur
This menu defines the metering profile for the selected ACL.
Table 164 ACL Meter Configuration Menu options
Command
cir <64-1000000>
mbsize <32-4096>
enable e|d
dpass drop|pass
reset
cur

ACL Re-mark configuration

Command: /cfg/acl/acl <1-762>/re-mark
[Re-mark Menu]
inprof
outprof
reset
cur
You can choose to re-mark IP header data for the selected ACL. You can configure different remark values, based on
whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.
Table 165 ACL Re-mark Configuration Menu options
Command
inprof
outprof
reset
cur
- Set committed rate in KiloBits/s
- Set maximum burst size in KiloBits
- Enable/disable port metering
- Set to Drop or Pass out of profile traffic
- Reset meter parameters
- Display current settings
Description
Configures the committed rate, in Kilobits per second. The committed rate must
be a multiple of 64.
Configures the maximum burst size, in Kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
Enables or disables metering on the ACL.
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Reset ACL Metering parameters to their default values.
Displays the current ACL metering parameters.
- In Profile Menu
- Out Profile Menu
- Reset re-mark settings
- Display current settings
Description
Displays the Re-mark In-Profile Menu.
Displays the Re-mark Out-of-Profile Menu.
Reset ACL Re-mark parameters to their default values.
Displays the current ACL re-mark parameters.
Configuration Menu 150