Rip Route Redistribution Configuration; Open Shortest Path First Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

RIP Route Redistribution configuration

Command: /cfg/l3/rip/redist fixed|static|ospf|eospf
[RIP Redistribute Fixed
add
rem
export
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the RIP Route Redistribute Menu options.
Table 133 RIP Redistribute Configuration Menu options
Command
add <1-32> <1-32>|all
remove <1-32> <1-32>|all
export <1-15>|none
cur

Open Shortest Path First configuration

Command: /cfg/l3/ospf
[Open Shortest Path First Menu]
aindex
range
if
virt
md5key
host
redist
lsdb
default
on
off
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Menu]
- Add rmap into route redistribution list
- Remove rmap from route redistribution list
- Export all routes of this protocol
- Display current route-maps added
Description
Adds selected routing maps to the RIP route redistribution list. To add all the 32
route maps, enter
one per line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
Removes the route map from the RIP route redistribution list.
Removes routing maps from the list. To remove all 32 route maps, enter
To remove specific route maps, enter routing map numbers one per line, NULL
at end.
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the routes of
the protocol, enter
Displays the current RIP route redistribute configuration.
- OSPF Area (index) Menu
- OSPF Summary Range Menu
- OSPF Interface Menu
- OSPF Virtual Links Menu
- OSPF MD5 Key Menu
- OSPF Host Entry Menu
- OSPF Route Redistribute Menu
- Set the LSDB limit for external LSA
- Export default route information
- Globally turn OSPF ON
- Globally turn OSPF OFF
- Display current OSPF configuration
. To add specific route maps, enter routing map numbers
all
.
none
.
all
Configuration Menu 130