Operations Menu; Introduction; Menu Information; Operations-Level Port Options - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Operations Menu

Introduction

Operations-level commands are used for making immediate and temporary changes to switch configuration. The
Operations Menu is used for bringing ports temporarily in and out of service. This menu is available only from an
administrator and operator login.

Menu information

Command: /oper
[Operations Menu]
port
vrrp
passwd
clrlog
ntpreq
The following table describes the Operations Menu options.
Table 181 Operations Menu options
Command
port <port number>
*vrrp
passwd <1-128
characters>
clrlog
ntpreq

Operations-level port options

Command: /oper/port <port number>
[Operations Port 1 Menu]
8021x
rmon
ena
dis
cur
Operations-level port options are used for temporarily disabling or enabling a port.
Table 182 Operations-Level Port Menu options
Command
8021x
rmon disable|enable
ena
NOTE: This command does not enable a port that has been disabled by an ekeying mismatch error.
dis
cur
- Operational Port Menu
- Operational Virtual Router Redundancy Menu
- Change current user password
- Clear syslog messages
- Send NTP request
Description
Displays the Operational Port Menu.
Displays the Operational Virtual Router Redundancy Menu. VRRP is available only on
the GbE2c Layer 2/3 Ethernet Blade Switch.
Allows the user to change the password. You need to enter the current password in
use for validation.
Clears all Syslog messages.
Allows the user to send requests to the NTP server.
- 8021.x Menu
- Enable/Disable RMON for port
- Enable port
- Disable port
- Current port state
Description
Displays the 802.1x Port Menu.
Enables or disables Remote Monitoring for the port. RMON must be enabled for any
RMON configurations to function.
Temporarily enables the port. The port will be returned to its configured operation mode
when the switch is reset.
Temporarily disables the port. The port will be returned to its configured operation mode
when the switch is reset.
Displays the current settings for the port.
Operations Menu 160