Address Resolution Protocol Configuration; Ip Forwarding Configuration; Network Filter Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Address Resolution Protocol configuration

Command: /cfg/l3/arp
[ARP Menu]
rearp
cur
Address Resolution Protocol (ARP) is the TCP/IP protocol that resides within the Internet layer. ARP resolves a physical
address from an IP address. ARP queries machines on the local network for their physical addresses. ARP also
maintains IP to physical address pairs in its cache memory. In any IP communication, the ARP cache is consulted to
see if the IP address of the computer or the router is present in the ARP cache. Then the corresponding physical
address is used to send a packet.
The following table describes the ARP Configuration Menu options.
Table 125 ARP Configuration Menu options
Command
rearp <2-120>
cur

IP Forwarding configuration

Command: /cfg/l3/frwd
[IP Forwarding Menu]
dirbr
on
off
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the IP Forwarding Configuration Menu options.
Table 126 IP Forwarding Configuration Menu options
Command
dirbr disable|enable
on
off
cur

Network Filter configuration

Command: /cfg/l3/nwf <1-256>
[IP Network Filter
addr
mask
enable
disable
delete
current
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
- Set re-ARP period in minutes
- Display current ARP configuration
Description
Defines re-ARP period in minutes. You can set this duration between two and 120 minutes.
Displays the current ARP configurations.
- Enable/disable forwarding directed broadcasts
- Globally turn IP Forwarding ON
- Globally turn IP Forwarding OFF
- Display current IP Forwarding configuration
Description
Enables or disables forwarding directed broadcasts. This command is disabled
by default.
Enables IP forwarding (routing) on the GbE2c.
Disables IP forwarding (routing) on the GbE2c. Forwarding is turned off by
default.
Displays the current IP forwarding settings.
1 Menu]
- IP Address
- IP Subnet mask
- Enable Network Filter
- Disable Network Filter
- Delete Network Filter
- Display current Network Filter configuration
Configuration Menu 125