Radius Server Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the SSHD Configuration Menu options.
Table 80 SSHD Configuration Menu options
Command
intrval <0-24>
scpadm
hkeygen
skeygen
sshport <TCP port number>
ena
dis
on
off
cur

RADIUS server configuration

Command: /cfg/sys/radius
[RADIUS Server Menu]
prisrv
secsrv
secret
secret2
port
retries
timeout
telnet
secbd
on
off
cur
NOTE: See the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Application Guide for information on
RADIUS.
Description
Defines interval for auto-generating the RSA server key. The switch will
auto-generate the RSA server key at the interval defined in this command.
The value of zero (0) means the RSA server key auto-generation is
disabled. If the switch has been busy performing any other key generation
and the assigned time of interval expires, the RSA server will skip
generating the key.
Defines the administrator password that is for Secure Copy (SCP) only. The
username for this SCP administrator is scpadmin.
Typically, SCP is used to copy files securely from one machine to another.
In the switch, SCP is used to download and upload the switch configuration
using secure channels.
Generates the RSA host keys manually. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH). But you
can generate the key manually by using this command if you need to
overwrite the key for security reasons. The command will take effect
immediately without executing the apply command.
Generates the RSA server key. The switch creates this key automatically
while configuring the switch with Secure Shell (SSH). You can generate the
key manually by using this command if you need to overwrite the key for
security reasons. The command will take effect immediately without
executing the apply command.
Sets the SSH server port number.
Enables the SCP apply and save.
Disables the SCP apply and save. This is the default for SCP.
Enables the SSH server.
Disables the SSH server. This is the default for the SSH server.
Displays the current SSH server configuration.
- Set primary RADIUS server address
- Set secondary RADIUS server address
- Set primary RADIUS server secret
- Set secondary RADIUS server secret
- Set RADIUS port
- Set RADIUS server retries
- Set RADIUS server timeout
- Enable/disable RADIUS backdoor for telnet/ssh/http/https
- Enable/disable RADIUS secure backdoor for telnet/ssh/http/https
- Turn RADIUS authentication ON
- Turn RADIUS authentication OFF
- Display current RADIUS configuration
Configuration Menu 93