Rmon History Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the RMON Configuration Menu options.
Table 171 RMON Menu options
Command
hist
event
alarm
cur

RMON history configuration

Command: /cfg/rmon/hist <1-65535>
[RMON History 1 Menu]
The following table describes the RMON History Menu options.
Table 172 RMON History Menu options
Command
ifoid <1-127 characters>
rbnum <1-65535>
NOTE: The maximum number of buckets that can be granted is 50.
intrval <1-3600>
owner <1-127 characters>
delete
cur
Description
Displays the RMON History Menu.
Displays the RMON Event Menu.
Displays the RMON Alarm Menu.
Displays the current RMON configuration.
ifoid - Set interface MIB object to monitor
rbnum - Set the number of requested buckets
intrval - Set polling interval
owner - Set owner for the RMON group of statistics
delete - Delete this history and restore defaults
cur - Display current history configuration
Description
Configures the interface MIB Object Identifier. The IFOID must correspond to the
standard interface OID, as follows: 1.3.6.1.2.1.2.2.1.1.x
The interface OID can have a maximum of 127 characters.
Configures the requested number of buckets, which is the number of discrete time
intervals over which data is to be saved.
The range is from 1 to 65535. The default is 30.
Configures the time interval over which the data is sampled for each bucket.
The range is from 1 to 3600 seconds. The default value is 1800 seconds.
Enter a text string that identifies the person or entity that uses this history index.
The owner can have a maximum of 127 characters.
Deletes the selected history index.
Displays the current RMON History parameters.
Configuration Menu 153