Snmpv3 Notify Table Configuration; System Access Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Table 89 SNMPv3 Target Parameters Table Configuration commands
Command
snmp-server target-parameters
<1-16> level {noAuthNo-
Priv|authNoPriv|authPriv}
no snmp-server target-
parameters <1-16>
show snmp-server target-
parameters <1-16>

SNMPv3 Notify Table configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular events
or conditions, and generates Notification-Class messages based on these events or conditions.
The following table describes the SNMPv3 Notify Table Configuration commands.
Table 90 SNMPv3 Notify Table Configuration commands
Command
snmp-server notify <1-16>
name <1-32 characters>
snmp-server notify <1-16>
tag <1-255 characters>
no snmp-server notify <1-
16>
show snmp-server notify
<1-16>

System Access configuration

The following table describes the System Access Configuration commands.
Table 91 System Access Configuration commands
Command
[no] access http enable
access http port <TCP port
number>
[no] access snmp {read-only|
read-write}
access telnet port <TCP port
number>
[no] access telnet enable
Description
Selects the level of security to be used when generating the SNMP messages
using this entry. The level
will be sent without authentication and without using a privacy protocol. The
level means that the SNMP message will be sent with
authNoPriv
authentication but without using a privacy protocol. The
that the SNMP message will be sent both with authentication and using a
privacy protocol.
Command mode: Global configuration
Deletes the
targetParamsTable
Command mode: Global configuration
Displays the current
targetParamsTable
Command mode: All
Description
Defines a locally arbitrary but unique identifier associated with this SNMP notify
entry.
Command mode: Global configuration
Defines a tag of 255 characters maximum that contains a tag value which is used
to select entries in the Target Address Table. Any entry in the
, that matches the value of this tag, is selected.
snmpTargetAddrTable
Command mode: Global configuration
Deletes the notify table entry.
Command mode: Global configuration
Displays the current notify table configuration.
Command mode: All
Description
Enables or disables HTTP (Web) access to the Browser-based Interface. It is
enabled by default.
Command mode: Global configuration
Sets the switch port used for serving switch Web content. The default is HTTP
port 80.
Command mode: Global configuration
Disables or provides read-only/write-read SNMP access.
Command mode: Global configuration
Sets an optional telnet server port number for cases where the server listens for
telnet sessions on a non-standard port.
Command mode: Global configuration
Enables or disables Telnet access.
Command mode: Global configuration
means that the SNMP message
noAuthNoPriv
authPriv
entry.
configuration.
Configuration Commands 93
means