Osfp Area Index Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the Open Shortest Path First Menu options.
Table 134 OSPF Configuration Menu options
Command
aindex <0-2>
range <1-16>
if <1-256>
virt <1-3>
md5key <1-255 characters>
host <1-128>
redist <fixed|static|rip>
lsdb <0-2000>
default <1-16777215> 1|2>|none
on
off
cur

OSFP Area Index configuration

Command: /cfg/l3/ospf/aindex <0-2>
[OSPF Area (index) 1
areaid
type
metric
auth
spf
enable
disable
delete
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Description
Displays the area index menu. This area index does not represent the
actual OSPF area number.
Displays summary routes menu for up to 16 IP addresses.
Displays the OSPF interface configuration menu.
Displays the Virtual Links menu used to configure OSPF for a Virtual
Link.
Assigns a string to MD5 authentication key.
Displays the menu for configuring OSPF for the host routes. Up to 128
host routes can be configured. Host routes are used for advertising
network device IP addresses to external networks to perform server load
balancing within OSPF. It also makes Area Border Route (ABR) load
sharing and ABR failover possible.
Displays Route Distribution Menu.
Sets the link state database limit. Enter 0 (zero) for no limit.
Sets one default route among multiple choices in an area.
Enter
none
Enables OSPF.
Disables OSPF.
Displays the current OSPF configuration settings.
Menu]
- Set area ID
- Set area type
- Set stub area metric
- Set authentication type
- Set time interval between two SPF calculations
- Enable area
- Disable area
- Delete area
- Display current OSPF area configuration
for no default route.
Configuration Menu 131