Rmon Event Configuration; Rmon Alarm Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

RMON event configuration

Command: /cfg/rmon/event <1-65535>
[RMON Event 1 Menu]
The following table describes the RMON Event Menu options.
Table 173 RMON Event Menu options
Command
descn <1-127 characters>
type none|log|trap|both
owner <1-127 characters>
delete
cur

RMON alarm configuration

Command: /cfg/rmon/alarm <1-65535>
[RMON Alarm 1 Menu]
The Alarm RMON group can track rising or falling values for a MIB object. The MIB object must be a counter, gauge,
integer, or time interval. Each alarm index must correspond to an event index that triggers once the alarm threshold is
crossed.
The following table describes the RMON Alarm Menu options.
Table 174 RMON Alarm Menu options
Command
oid <1-127 characters>
intrval <1-65535>
descn - Set description for the event
type - Set event type
owner - Set owner for the event
delete - Delete this event and restore defaults
cur - Display current event configuration
Description
Enter a text string to describe the event.
The description can have a maximum of 127 characters.
Selects the type of notification provided for this event. For log events, an entry is
made in the log table and sent to the configured syslog host. For trap events, an
SNMP trap is sent to the management station (/cfg/snmp/trap).
Enter a text string that identifies the person or entity that uses this event index.
The owner can have a maximum of 127 characters.
Deletes this event index.
Displays the current RMON Event parameters.
oid - Set MIB oid datasource to monitor
intrval - Set alarm interval
sample - Set sample type
almtype - Set startup alarm type
rlimit - Set rising threshold
flimit - Set falling threshold
revtidx - Set event index to fire on rising threshold crossing
fevtidx - Set event index to fire on falling threshold crossing
owner - Set owner for the alarm
delete - Delete this alarm and restore defaults
cur - Display current alarm configuration
Description
Configures an alarm MIB Object Identifier.
The alarm OID can have a maximum of 127 characters.
Configures the time interval over which data is sampled and compared
with the rising and falling thresholds.
The range is from 1 to 65535 seconds. The default is 1800 seconds.
Configuration Menu 154