Vrrp Interface Configuration; Vrrp Tracking Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the Virtual Router Group Priority Tracking Configuration Menu options.
Table 154 Virtual Router Group Priority Tracking Configuration Menu options
Command
ifs disable|enable
ports disable|enable
cur

VRRP Interface configuration

Command: /cfg/l3/vrrp/if <1-255>
[VRRP Interface 1 Menu]
auth
passw
del
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
This menu is used for configuring VRRP authentication parameters for the IP interfaces used with the virtual routers.
The interface-number (1 to 255) represents the IP interface on which authentication parameters must be configured.
The following table describes the VRRP Interface Configuration Menu options.
Table 155 VRRP Interface Configuration Menu options
Command
auth none|password
passw <password>
del
cur

VRRP Tracking configuration

Command: /cfg/l3/vrrp/track
[VRRP Tracking Menu]
vrs
ifs
ports
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
This menu is used for setting weights for the various criteria used to modify priority levels during the master router
election process. Each time one of the tracking criteria is met, the priority level for the virtual router is increased by an
amount defined through this menu.
Description
When enabled, the priority for this virtual router will be increased for each
other IP interface active on this switch. An IP interface is considered active
when there is at least one active port on the same VLAN. This helps elect the
virtual routers with the most available routes as the master. This command is
disabled by default.
When enabled, the priority for this virtual router will be increased for each
active port on the same VLAN. A port is considered "active" if it has a link and
is forwarding traffic. This helps elect the virtual routers with the most available
ports as the master. This command is disabled by default.
Displays the current configuration for priority tracking for this virtual router.
- Set authentication types
- Set plain-text password
- Delete interface
- Display current VRRP interface configuration
Description
Defines the type of authentication that will be used:
or (password authentication).
password
Defines a plain text password up to eight characters long. This password will
be added to each VRRP packet transmitted by this interface when password
authentication is chosen (see
Clears the authentication configuration parameters for this IP interface. The IP
interface itself is not deleted.
Displays the current configuration for this IP interface's authentication
parameters.
- Set priority increment for virtual router tracking
- Set priority increment for IP interface tracking
- Set priority increment for VLAN switch port tracking
- Display current VRRP Priority Tracking configuration
(no authentication),
none
above).
auth
Configuration Menu 145