Snmpv3 Group Table Information; Snmpv3 Community Table Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the SNMPv3 Access Table information.
Table 11 Access Table parameters
Field
Group Name
Prefix
Model
Level
Match
ReadV
WriteV
NotifyV

SNMPv3 Group Table information

Command: /info/sys/snmpv3/group
Sec Model
---------- -----------------------------
snmpv1
usm
usm
A group is a combination of security model and security name that defines the access rights assigned to all the
security names belonging to that group. The group is identified by a group name.
The following table describes the SNMPv3 Group Table information.
Table 12 Group Table parameters
Field
Sec Model
User Name
Group Name

SNMPv3 Community Table information

Command: /info/sys/snmpv3/comm
Index
---------- ---------- -------------------- ----------
trap1
This command displays the community table information stored in the SNMP engine.
Description
Displays the name of group.
Displays the prefix that is configured to match the values.
Displays the security model used, for example, SNMPv1, or SNMPv2 or USM.
Displays the minimum level of security required to gain rights of access. For example,
noAuthNoPriv, authNoPriv, or auth-Priv.
Displays the match for the contextName. The options are: exact and prefix.
Displays the MIB view to which this entry authorizes the read access.
Displays the MIB view to which this entry authorizes the write access.
Displays the Notify view to which this entry authorizes the notify access.
User Name
v1v2only
adminmd5
adminsha
Description
Displays the security model used, which is any one of: USM, SNMPv1, SNMPv2, and SNMPv3.
Displays the name for the group.
Displays the access name of the group.
Name User Name
public v1v2only
Group Name
-------------------------------
v1v2grp
admingrp
admingrp
Tag
v1v2trap
Information Menu 26