Statistics Menu; Introduction; Menu Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Statistics Menu

Introduction

You can view switch performance statistics in the user, operator, and administrator command modes. This chapter
discusses how to use the CLI to display switch statistics.

Menu information

Command: /stats
[Statistics Menu]
port
l2
l3
mp
acl
snmp
ntp
ufd
clrmp
dump
The following table describes the Statistics Menu options.
Table 44 Statistics Menu options
Command
port <port number>
l2
l3
mp
acl
snmp
ntp <clear>
ufd <clear>
clrmp
dump
- Port Stats Menu
- Layer 2 Stats Menu
- Layer 3 Stats Menu
- MP-specific Stats Menu
- ACL Stats Menu
- Show SNMP stats
- Show NTP stats
- Show Uplink Failure Detection stats
- Clear all MP related stats
- Dump all stats
Usage
Displays the Port Statistics Menu for the specified port. Use this command to display traffic
statistics on a port-by-port basis. Traffic statistics are included in SNMP Management
Information Base (MIB) objects.
Displays the Layer 2 Statistics Menu.
Displays the Layer 3 Statistics Menu.
Displays the Management Processor Statistics Menu. Use this command to view information
on how switch management processes and resources are currently being allocated.
Displays the Access Control List Statistics Menu.
Displays SNMP statistics.
Displays Network Time Protocol (NTP) Statistics.
You can execute the clear command option to delete all statistics.
Displays Uplink Failure Detection statistics.
Add the argument, , to clear UFD statistics.
clear
Clears all Management Processor statistics.
Dumps all switch statistics. Use this command to gather data for tuning and debugging
switch performance. If you want to capture dump data to a file, set your communication
software on your workstation to capture session data prior to issuing the dump command.
Statistics Menu 61