System Access Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

The following table describes the SNMPv3 Notify Table Configuration menu options.
SNMPv3 Notify Table Configuration Menu options
Table 93
Command
name <1-32 characters>
tag <1-255 characters>
del
cur

System Access configuration

Command: /cfg/sys/access
[System Access Menu]
The following table describes the System Access Configuration menu options.
System Access Configuration Menu options
Table 94
Command
mgmt
user
http disable|enable
https
wport <TCP port number>
snmp disable|read-
only|read-write
tsbbi enable|disable
tnet disable|enable
Description
Defines a locally arbitrary but unique identifier associated with this SNMP notify
entry.
Defines a tag of 255 characters maximum that contains a tag value which is
used to select entries in the Target Address Table. Any entry in the
snmpTargetAddrTable, that matches the value of this tag, is selected.
Deletes the notify table entry.
Displays the current notify table configuration.
mgmt - Management Network Definition Menu
user - User Access Control Menu (passwords)
http - Enable/disable HTTP (Web) access
https - HTTPS Web Access Menu
wport - Set HTTP (Web) server port number
snmp - Set SNMP access control
tsbbi - Enable/disable telnet/ssh configuration from BBI
tnet - Enable/disable Telnet access
tnport - Set Telnet server port number
tport - Set the TFTP Port for the system
cur - Display current system access configuration
Description
Displays the Management Configuration Menu.
Displays the User Access Control Menu.
Enables or disables HTTP (Web) access to the Browser-based Interface. It is
enabled by default.
Displays the HTTPS Menu.
Sets the switch port used for serving switch Web content. The default is
HTTP port 80.
Disables or provides read-only/write-read SNMP access.
Enables or disables BBI configuration control s for Telnet and SSH.
Enables or disables Telnet access. You see this command only if you are
connected to the switch through a serial connection. The default setting is
enabled.
Configuration Menu
129