Layer 2 Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the User Name information.
Table 17 User Name Information menu
Field
user
oper
admin
Current User ID Table

Layer 2 information

Command: /info/l2
[Layer 2 Menu]
fdb
lacp
8021x
stp
cist
trunk
vlan
gen
dump
The following table describes the Layer 2 Information Menu options.
Table 18 Layer 2 Information Menu options
Command
fdb
lacp
8021x
stp
cist
Usage
Displays the status of the
Displays the status of the
Displays the status of the
Displays the status of configured user IDs. To configure new user IDs, use the
/cfg/sys/access/user/uid
- Forwarding Database Information Menu
- Link Aggregation Control Protocol Menu
- Show 802.1x information
- Show STP information
- Show CIST information
- Show Trunk Group information
- Show VLAN information
- Show general information
- Dump all layer 2 information
Usage
Displays the Forwarding Database Information Menu.
Displays the Link Aggregation Control Protocol Information Menu.
Displays the 802.1x Information Menu.
n addition to seeing if STP is enabled or disabled, you can view the
I
following STP bridge information:
Priority
Hello interval
Maximum age value
Forwarding delay
Aging time
You can also refer to the following port-specific STP information:
Port number and priority
Cost
State
Displays Common internal Spanning Tree (CIST) bridge information,
including the following:
Priority
Hello interval
Maximum age value
Forwarding delay
You can also view port-specific CIST information, including the following:
Port number and priority
Cost
State
access level.
user
(operator) access level.
oper
(administrator) access level.
admin
command.
Information Menu 32