Font (Selecting The Default Font) - Kyocera ECOSYS P4040dn Operation Manual

Font (Selecting the default font)

You can select the default font. The default font can be one of the internal fonts or a font that is downloaded to the printer
memory or stored on SD card, or SSD.
In this menu, you can also set the type and pitch for Courier and Letter Gothic.
The options available in Font menu are as follows:
• Selecting Regular or Dark Courier/Letter Gothic...4-48
• Changing the Default Font Size...4-48
• Character Pitch...4-49
Font:
01 Font Type
Font ID
02
Courier
03
Font Type:
* Internal
01
Option
02
Font:
Font Type
01
02 Font ID
03 Courier
Font ID:
1
2
Exit
3
4
5
6
Exit
7
8
I000
9
In the Print Settings menu, press
Press [OK]. The Font menu screen appears.
Press or to select Font Type.
Press [OK]. The Font Type screen appears.
To select a font built-in the printer, press
Press [OK]. Select the font type and the Font menu reappears.
Press or to select Font ID.
Press [OK]. The Font ID entry screen appears.
Press or to select the number of the desired font.
Note It is possible to check the numbers of the built-in fonts
by outputting a Font List. For details, refer to Font List
(Printing a list of the printer's fonts) on page 4-14.
To select optional fonts other than those built-in, select Option in
step 5. You can perform this operation only when optional fonts are
installed in the printer.
4-47
Operation Panel
or to select Font.
or to select Internal.