Spoiler Mix - FUTABA 10CAG Instruction Manual

SPOILER MIX ( GLID
MIX works linking with BUTTERFLY function.
Adjustability:
• Position: -100% to +100%, with a default of -50% (off), +50% (on)
• Channel: Spoiler 1: ch8, 5 or 3 (ch8 or 3*), Spoiler 2: NULL, ch5 or 3 (NULL or ch3*)
• Elevator setting: Rate: -100% to +100%, Delay: 0% to 100%
• SWITCH A-H fully assignable. Also LOGIC SW (Lsw1 to 3) may be assigned. Set up LOGIC SW : See p. 38.
GOAL of EXAMPLE:
2-servo spoiler mode.
Adjust the spoiler servo position to
60% .
Where next?
STEPS:
Open the SPOILER MIX function and
move to 2nd page.
Activate the function.
Assign the SPO2-CH . (Ex: CH3)
Adjust the spoiler servo position.
(Ex: SPO1 SPO2 = +55% to +60% )
Optional: Set the elevator rate.
(EX: 10% )
Optional: Set the delay. (EX: 25% )
Close menu.
Set up BUTTERFLY mixing: see p. 87.
83
* GLID (2A+2F) mode
INPUTS:
for 1 second. (If BASIC ,
C to SPOILER MIX .
to 2nd page.
to MIX . to ON .
C
C to SPO2-CH . to CH3 .
C to +50% . ( SPO1 )
C to +50% . ( SPO2 )
C to rate - ELE . to 10% .
C to dly - ELE . to 25% .
SPOILER
again.)
to +60% .
to +60% .