FUTABA 10CAG Instruction Manual page 31

MODEL COPY
128K CAMPac). The name of the model memory you are copying into is displayed for clarity.
Data cannot be converted from 8U or 9Z memory types. If a CAMPac is installed into the T10CG that has data on it
from another radio type, it will have to be re-initialized which deletes all data.
Examples:
• Create a new model that is similar to one you have already programmed.
• Copy the current model data into another model memory as a backup or before experimenting with new settings.
• Store your model data to an optional CAMPac prior to sending your radio for service.
glider in extreme wind; airplane model at extreme altitudes).
• Store your model data to an optional CAMPac to use or copy the settings into a friend's T10CG (A or H) transmitter so
GOAL of EXAMPLE:
Copy model 3 into model 5.
N O T E : T h i s i s o n e o f s e v e r a l
functions for which the radio requires
Where next?
*Radio emits a repeating "beep" and shows progress on screen as the model memory is being copied. Note that if the power switch is turned off prior
to completion, the data will not be copied.
Notes:
• Any data in the model copied to will be written over and lost, including name,
type and modulation. Upon completion, it cannot be recovered.
• To copy from one T10CG to another, use an optional CAMPac. (Note: The
model may be flown directly off the CAMPac's memory, not requiring re-
copying into the 2nd transmitter. For more information on CAMPacs, please
see p. 10.)
• With the trainer FUNC mode it is not necessary to have the student radio contain
the setup of the aircraft. See TRAINER , p. 47.
STEPS:
Open the BASIC menu, then open MODEL
submenu.
Confirm you are currently using the
proper model memory. (Ex: 3)
Go to MODEL COPY and choose the
model to copy into. (Ex: 5)
Close.
SELECT the copy you just made: see p. 30.
Rename it (it is currently named exactly the same as the model copied): see p. 32.
Turn off the transmitter and remove the CAMPac for safe keeping or insertion
31
INPUTS:
for 1 second.
(If ADVANCE ,
C to MODEL .
If SELECT does not indicate 3 , use MODEL
SELECT , p. 25.
C to COPY . to 5 .
for 1 second.
Are you sure? displays.
again.)
*