FUTABA 10CAG Instruction Manual page 94

GOAL of EXAMPLE:
Change the MODEL TYPE and SWASH
TYPE of model #3 from aircraft to 120
degree CCPM with 2 servos working in
unison for collective pitch and aileron
[ HELI ( HR3 )].
Where next?
1
Radio emits a repeating "beep" and shows progress on screen as the model type is being changed. Note that if the power switch is turned off prior to
completion, the model type will not be changed.
STEPS:
Confirm you are currently using the
proper model memory. (example: 3)
Open PARAMETER submenu.
Select proper MODEL TYPE .
( HELICOPTER )
Change to the desired SWASH TYPE
(example: HR3.)
Close.
If a single servo is not operating properly, REVERSE : see p. 38.
If a control is operating backwards (i.e. Elevator), see SWASH AFR , p. 95.
If unsure see SWASH AFR .
94
INPUTS:
On home screen, check model name and
# on top left.
If it is not the correct model (example:3),
see MODEL SELECT , p. 25.
for 1 second.
(If ADVANCE ,
to 2nd page of menu.
C to PARAMETER .
C to TYPE .
to HELICOPTER .
Are you sure? displays.
C to SWASH .
to HR3 . for 1 second.
Are you sure? displays.
again.)
for 1 second.
1