Camber Mix - FUTABA 12K Instruction Manual

CAMBER MIX

This function adjusts the rate of camber
operation for the wing camber (ailerons, camber
flaps, brake flaps) in the negative and positive
directions. The aileron, flap, and elevator rates
can also be adjusted independently and attitude
changes caused by camber operation can be
corrected.
menu and access the setup screen
shown below by pushing the RTN
button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
setting
<Model Menu (Airplane/Glider Functions)>
148
cut switch
*Initial setting assigns camber operation to side lever LS.
can be made by changing the mixing rate
*The display screen is an example. The actual
screen depends on the model type.
<Push Dial>
(Glider: Currently selected
condition name)