Printing Highlight Color Applications On Freeflow Print Server Lcds; Systems - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Printing highlight color applications on FreeFlow Print Server LCDS

systems

Using LCDS Print Description Language
If you have a Xerox 4850, 4890, or DP92C HighLight Color LPS,
or the FreeFlow Print Server-based Xerox DT128/155/180 HLC
Printing System, your applications probably include the use of
highlight color (one color plus black). The JDLs used to print
these applications contain commands and parameters that
specify the location and the color ink to be used. These color
JDLs may also contain commands indicating what the system
should do if a JDL specifies a different color ink from what is
loaded in the printer.
The FreeFlow Print Server LCDS systems can print jobs that
were designed for the 4850, 4890, or DP92C LPS and contain
color commands. When you run a highlight color job on non-
highlight-color systems, the job prints in black ink. (Some solid
colored or shaded areas may print in various shades of gray.)
The following table lists the highlight color related PDL
commands, parameters, and DJDEs.
Table 1-15. Highlight color commands
Command Color parameter
ABNORMAL IMISMATCH
ISUBSTITUTE
CME INKS
IDR ICATALOG
ILIST
PALETTES
LINE INKINDEX
LMODIFY INK
SELECT
TEST
OUTPUT FORMS
GRAPHICS
IDFAULT
IDR
PDL principles and procedures
DJDE
available?
No
No
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
1-79