Assigning UDP Ports to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
UDP to Queue page.
CLI Command
qos map udp-port-queue
port1.port8 to
queue-id
show qos map udp-port-
queue
no qos map udp-port-queue
The following is an example of the CLI commands:
Console (config)# qos map udp-port-queue 2000 80 to 2
Console (config)# show qos map udp-port-queue
Description
Modifies the UDP-Port to queue.
Displays the UDP-Port to queue.
Removes the UDP port from a queue.
C o n f i g u r i n g Q u a l i t y o f S e r vi c e
355