Dell PowerConnect 3324 User Manual page 215

CLI Command
show interfaces description
[ethernet interface | port-channel
port-channel-number]
The following is an example of the CLI commands:
Console (config)# interface ethernet 1/e5
Console (config-if)#
Console (config-if)# description RD SW#3
Console (config-if)# shutdown
Console (config-if)# no shutdown
Console (config-if)# speed 100
Console (config-if)# duplex full
Console (config-if)# negotiation
Console (config-if)# back-pressure
Console (config-if)# flowcontrol on
Console (config-if)# mdix auto
Console (config-if)# exit
Console (config)# exit
Console# show interfaces configuration
PortTypeDuplexSpeedNegFlowBackMDIXAdmin
ContPresModeState
-----------------------------------------------
1/e11g-combo-cFull1000AutoOnEnableAutoUp
2/e1100-copperFull1000OffOffDisableoffUp
2/e21g-FiberFull1000OffOffDisableonUp
Neg : Negotiation
Flow Cont: Flow Control
Back Pres: Back Pressure
Console# show interfaces status
Description
Displays the description for all
configured interfaces.
Configuring Switch Infor mation
215