Dell PowerConnect 3324 User Manual page 270

–
• GVRP Registration—Enables GVRP registration status. The possible field values are:
–
–
Enabling GVRP on the device:
Open the GVRP Parameters page.
1
Select Enable in the GVRP Global Status field.
2
Click Apply Changes. GVRP is enabled on the device.
3
Defining GVRP Ports:
Open the GVRP Parameters page.
1
Click Show All. The GVRP Parameters page opens. The GVRP Port Parameters
2
contains parameters for enabling GVRP on a port and permitting port to participate in
VLAN registration through GVRP . In addition, the GVRP Port Parameters Table also
contains information about the VLAN registration mode. Specific ports can also be
blocked from registering or being used in a VLAN.
Select a port.
3
Define the GVRP State, Dynamic VLAN Creation, VLAN Registration, and the
4
GVRP Registration fields.
Click Apply Changes. GVRP is enabled on the port, parameters are defined, and the
5
device is updated.
Displaying the GVRP Port Parameters Table:
Open the GVRP Parameters page.
1
Click Show All. The GVRP Port Parameters Table opens.
2
270 Configuring Switch Infor m ation
Disable—Disables creating VLANs through GVRP .
Enable—Enables VLAN registration through GVRP .
Disable—Disables VLAN registration through GVRP .