G A R P T i m e r s P a g e
The GARP Timers page contains the following fields:
•
Interface—Indicates the type of interface on which GARP Timers are shown. The
possible field values are:
–
Port—Indicates the port for which GARP Timers are displayed.
–
LAG—Indicates the LAG for which GARP Timers are displayed.
•
GARP Join Timer (10–2147483647)—Indicates the time in milliseconds that PDUs
are transmitted.
•
GARP Leave Timer (10–2147483647)—Indicates the time lapse in milliseconds that
the device waits before leaving its GARP state. The Leave Time is activated by a Leave
All Time message sent/received, and cancelled by the Join message received. The
default is 600 milliseconds.
•
GARP Leave All Timer (10–2147483647)—Used to confirm the port within the
VLAN. The time in milliseconds between messages sent. The default is
10000 milliseconds.
Configuring Switch Infor mation
237