Dell PowerConnect 3324 User Manual page 27

Color Activity
Green Static
Green Flashing
Red Static
Red Flashing
Off Off
G i g a P o r t L i n k A c t i v i t y S t a t u s
• The Mode button located next to the system LEDs is used to toggle between the two
display modes. For an explanation of the port LEDs in each of these modes, see
LEDs".
When a power supply fails, an error message and several traps are generated. The status of
each power supply is indicated by LEDs on the front panel.
• The four LEDs on the right side show the status of the power supplies, diagnostic
mode, and stack mode as follows:
LED Color Activity
PWR Green Static
Amber Static
RPS Green Static
Amber Static
Off Off
Diag Green Flashing
Stack Green Static
Off Off
P o w e r, D i a g n o s t i c , a n d S t a c k L E D s
Definition
Port link up.
Port operating at 1000 Mbps.
Port link up with activity.
Port operating at 1000 Mbps.
Port link up.
Port operating at 10/100 Mbps.
Port link up with activity.
Port operating at 10/100 Mbps.
Port link down.
Definition
Power supply operational.
Power supply failure.
Redundant power supply operational.
Redundant power supply failure.
Redundant power supply not present.
The system is currently in the
Diagnostic mode.
Stacking successfully completed.
Standalone.
"Port
H a r d w a r e D e s c r i p t i o n
27