C o S t o Q u e u e M a p p i n g Ta b l e P a g e
The CoS to Queue Mapping Table page contains the following fields:
•
Class of Service—Specifies the CoS priority tag values, where zero is the lowest and
seven is the highest.
•
Queue—Indicates the traffic forwarding queue to which the CoS priority is mapped.
Four traffic priority queues are supported.
NOTE: In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore,
assigning additional traffic to Queue 4 may interfere with stack control.
•
Use Defaults—Uses the device defaults for mapping CoS values to a forwarding
queue.
Mapping a CoS value to a Queue:
Open the CoS to Queue page.
1
Select a CoS entry.
2
Define the queue number in the Queue field.
3
Click Apply Changes. The CoS value is mapped to a queue, and the device is
4
updated.
C o n f i g u r i n g Q u a l i t y o f S e r vi c e
347