Dell PowerConnect 3324 User Manual page 285

The IGMP Port/LAG Members Table figure displays IGMP Port/LAG member status.
I G M P P o r t / L A G M e m b e r s Ta b l e
The IGMP Port/LAG Members Table Control Settings Table contains the settings for
managing IGMP port and LAG members.
I G M P P o r t / L A G M e m b e r s Ta b l e C o n t r o l S e t t i n g s
Port Control
D
S
F
Blank
Defining ports to receive multicast service:
Open the Bridge Multicast page.
1
Define the VLAN ID and the Bridge Multicast Address fields.
2
Toggle a port to S to join the port to a selected multicast group, or Toggle a port to F
3
to forbid the port from joining that multicast group.
Click Apply Changes. The port is assigned to the multicast group, and the device is
4
updated.
Definition
Indicates that the port/LAG has joined the
multicast group dynamically in the Current
row.
Attaches the port to the multicast group as
static member in the Static Row. Indicates
that the port/LAG has joined the Multicast
group statically in the Current row.
Indicates that the port is forbidden to join this
multicast group.
Indicates that the port is not attached to the
multicast group.
Configuring Switch Infor mation
285