•
Source IP Address—Indicates the interface Source IP Address to which the packet is
matched.
•
Network Mask—Indicates the interface network mask to which the packet is matched.
•
Prefix Length—Indicates the prefix length to which the packet is matched.
•
Action—Defines the Management Security Rule action. The possible field values are:
–
–
Define the Access Profile Name field.
3
Define the Rule Priority, Management Method, Interface, Source IP , Network Mask,
4
Prefix Length, and Action fields.
Click Apply Changes. The new Access Profile is added, and the device is updated.
5
Adding Rules to Access Profile:
NOTE: The first rule must be defined to begin matching traffic to access profiles.
Open the Access Profiles page.
1
Click Add Rule to Profile. The Add An Access Profile Rule page opens.
2
A d d A n A c c e s s P r o f i l e R u l e P a g e
The Add An Access Profile Rule page contains the following fields:
•
Access Profile Name—Indicates the name of the Access Profile.
•
Rule Priority (1-65535)—Indicates the rule priority.
144
Configuring System Infor m ation
Permit—Permits management access to the defined interface.
Deny—Denies management access to the defined interface.