A d d A R P E n t r y P a g e
Select an Interface and define its IP Address and MAC address fields.
3
Click Apply Changes. The ARP Table entry is added, and the device is updated.
4
Displaying the ARP Table:
Open the ARP Setting page.
1
Click Show All. The ARP Table page opens.
2
A R P Ta b l e P a g e
Deleting ARP Table entry:
Open the ARP Setting page.
1
Click Show All. The ARP Table page opens.
2
Select a table entry.
3
Check the Remove check box
4
Click Apply Changes. The ARP Table entry is deleted, and the device is updated.
5
Configuring ARP Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the ARP Settings page.
138
Configuring System Infor m ation