Dell PowerConnect 3324 User Manual page 221

The following message displays:
console# sh interfaces status port-channel 1
ch Type Duplex Speed Neg
..............................................................
ch1 100M Full
The following table summarizes the equivalent CLI commands for configuring LAGs as
displayed in the LAG Configuration page.
CLI Command
interface port-channel port-
channel-number
channel-group port-
channel-number mode {on |
auto}
show interfaces port-channel
[port-channel-number]
The following is an example of the CLI commands:
Console (config)# interface ethernet 1/e5
Console (config-if)# channel-group 1 mode on
Console (config-if)# exit
Console (config-if)# exit
Console # show interfaces port-channel
Channel Port
----------------------------------------------
1Active 1/e5, 2/e2 Inactive 3/e3
2Active 1/e2
3Inactive 3/e8
Flow
Control State Pressure
100 Disabled Off
Description
Creates a port-channel and enters port-
channel configuration mode.
Associates a port with a port-channel.
Displays Port-channel information (which
ports are members of a Port-channel, and
whether they are currently active or not).
Link Back
Up Disabled
Configuring Switch Infor mation
221