•
UDP Port (1-65535)—Indicates the UDP port to which the logs are sent for the
selected server. The possible range is 1 - 65,535. The default value is 514.
•
Facility—Indicates the facility mapping level for the selected server. The default value
is Local 0. The possible values are:
–
–
•
Description—Displays the user-defined server description.
•
Delete Server—Deletes the currently selected server from the Available Servers list.
The possible field values are:
–
–
The Remote Logs Server Settings page also contains a severity list. The severity definitions
are the same as the severity definitions on the
Sending logs to a server:
Open the Remote Logs Server Settings page.
1
Select a server from the Available Servers drop-down list.
2
Define the UDP Port, Facility, and Description fields.
3
Select the log severity in the Severity to Include check boxes.
4
Click Apply Changes. The log settings are saved, and the device is updated.
5
Defining a new server:
Open the Remote Logs Server Settings page.
1
Click Add. The Add a Log Server page opens.
2
124
Configuring System Infor m ation
Local 0 - Local 7.
No Map.
Checked—Deletes the server from the Available Servers list.
Unchecked—Maintains the server in the Available Servers list.
"Global Log Parameters
Page".