Dell PowerConnect 3324 User Manual page 147

CLI Command
management access-list name
permit [ethernet interface-
number | vlan vlan-id | port-
channel number] [service
service]
permit ip-source ip-address
[mask mask | prefix-length]
[ethernet interface-number |
vlan vlan-id | port-channel
number] [service service]
deny [ethernet interface-
number | vlan vlan-id | port-
channel number] [service
service]
deny ip-source ip-address
[mask mask | prefix-length]
[ethernet interface-number |
vlan vlan-id | port-channel
number] [service service]
management access-class {console-
only | name}
show management access-list
[name]
show management access-class
The following is an example of the CLI commands:
Console (config)# management access-list mlist
Console (config-macl)# permit ethernet 1/e1
Console (config-macl)# permit ethernet 2/e9
Console (config-macl)# deny ethernet 1/e2
Console (config-macl)# deny ethernet 2/e10
Console (config-macl)# exit
Description
Defines an access-list for management,
and enters the access-list context for
configuration.
Sets port permitting conditions for the
management access list.
Sets port permitting conditions for the
management access list, and the
selected management method.
Sets port denying conditions for the
management access list, and the
selected management method.
Sets port denying conditions for the
management access list, and the
selected management method.
Defines which access-list is used as the
active management connections.
Displays the active management access-
lists.
Displays information about
management access-class.
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
147