•
Ingress Filtering—Enables ingress filtering by the LAG. Ingress filtering discards
packets which do not include an ingress port. The possible field values are:
–
–
Assigning LAG settings:
Open the VLAN LAG Settings page.
1
Define the Port Mode, PVID, Frame Type, and the Ingress Filtering fields.
2
Click Apply Changes. The VLAN LAG parameters are defined, and the device is
3
updated.
Displaying the VLAN LAG Table:
Open the VLAN LAG Settings page.
1
Click Show All. The VLAN LAG Table opens.
2
V L A N L A G Ta b l e
Assigning LAGs to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning LAGs to
VLAN groups as displayed in the VLAN LAG Settings page.
CLI Command
switchport mode {access |
LAG | general}
switchport LAG native vlan
vlan-id
266
Configuring Switch Infor m ation
Enable—Enables ingress filtering by the LAG.
Disable—Disable ingress filtering by the LAG.
Description
Configures a port VLAN membership mode.
Defines the LAG as a member of the
specified VLAN, and the VLAN ID as the
"port default VLAN ID (PVID)".