The following table describes the parameter combination settings required to configure
ports. These settings ensure that configuration functionalities are maintained.
Auto
MDI
MDIX
•
Current MDI/MDIX—Indicates the MDIX operational status. The possible field
values are:
–
–
–
•
LAG—Specifies if the port is part of a LAG.
Defining Port Parameters:
Open the Port Configuration page.
1
Select a port in the Port field.
2
Define the Description, Admin Status, Admin Speed, Admin Duplex, Auto
3
Negotiation, Back Pressure, Admin Auto MDIX and/or Admin Flow Control fields.
Click Apply Changes. The port parameters are saved to the device.
4
Modifying Port Parameters:
Open the Port Configuration page.
1
Select a port in the Port field.
2
Modify the Description, Admin Status, Admin Speed, Admin Duplex, Auto
3
Negotiation, Back Pressure, Admin Auto MDIX and/or Admin Flow Control fields.
Click Apply Changes. The port parameters are saved to the device.
4
Displaying the Port Configuration Table:
Open the Port Configuration page.
1
Click Show All. The Port Configuration Table opens.
2
212
Configuring Switch Infor m ation
Auto Negotiation
Enabled
Disabled
legal
illegal
legal
legal
legal
legal
MDI
MDIX
Auto—Indicates that the value is set automatically.