Modifying STP Port Properties:
Open the STP Port Settings page.
1
Modify the Priority, Path Cost, Default Path Cost, and the Fast Link fields.
2
Click Apply Changes. The STP port parameters are modified, and the device is
3
updated.
S T P P o r t Ta b l e P a g e
Defining STP Port Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port
parameters as displayed in the STP Port Settings page.
CLI Command
spanning-tree disable
spanning-tree cost cost
spanning-tree port-
priority priority
show spanning-tree [ethernet
interface | port-channel
port-channel-number]
spanning-tree portfast
The following is an example of the CLI commands:
Console(config)# interface ethernet 1/e5
Console(config-if)# spanning-tree disable
Description
Disables spanning tree on a specific port.
Configures the spanning tree port cost
for a port.
Configures port priority.
Displays spanning tree configuration.
Enables PortFast mode.
Configuring Switch Infor mation
247