Dell PowerConnect 3324 User Manual page 352

T C P t o Q u e u e M a p p i n g Ta b l e
Removing a TCP port mapping from the TCP to Queue Mapping Table:
Open the TCP to Queue page.
1
Click Show All. The TCP to Queue Mapping Table opens.
2
Select a port in the TCP Port List drop-down list. The queue to which the port is
3
assigned displays in the Map to Queue drop-down list.
Check the Remove check box.
4
Click Apply Changes. The TCP port is removed from the traffic queue.
5
Assigning TCP Ports to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
TCP to Queue page.
CLI Command
qos map tcp-port-queue
port1.port8 to
queue-id
show qos map tcp-port-
queue
no qos map tcp-port-queue
The following is an example of the CLI commands:
Console (config)# qos map tcp-port-queue 6001 to 2
Console (config)# exit
Console # exit
352 Configuring Quality of Ser vice
Description
Modifies the TCP-Port to queue.
Displays the TCP-Port to queue.
Removes the TCP port from a queue.