•
Leave Time Out (1-3600000)—Specifies the amount of time in seconds after a port
leave message is received before the entry is aged out. The possible field values are:
–
User-Defined—Indicates the user-defined Leave Timeout period.
–
Immediate Leave—Specifies an immediate Leave Timeout period.
Displaying the IGMP Snooping Table:
Open the IGMP Snooping page.
1
Click Show All. The IGMP Snooping Table opens.
2
I G M P S n o o p i n g Ta b l e
Configuring IGMP Snooping with CLI Commands
The following table summarizes the equivalent CLI commands for configuring IGMP
Snooping as displayed in the IGMP Snooping page.
CLI Command
ip igmp snooping
ip igmp snooping mrouter learn-
pim-dvmrp
ip igmp snooping host-time-out
time-out
ip igmp snooping mrouter-time-
out time-out
ip igmp snooping leave-time-out
{time-out | immediate-leave}
Description
Enables Internet Group Management
Protocol (IGMP) snooping a specific
VLAN.
Enables automatic learning of Multicast
router ports in the context of a specific
VLAN.
Configures the host-time-out.
Configures the mrouter-time-out.
Configures the leave-time-out.
Configuring Switch Infor mation
291