To open the LAG Configuration page:
NOTE: If port configuration is modified while the port is a LAG member, the configuration
change is only effective after the port is removed from the LAG.
•
Click Switch > Ports > LAG Configuration in the Tree View. The LAG
Configuration page displays.
L A G C o n f i g u r a t i o n P a g e
The LAG Configuration page contains the following fields:
•
LAG—Indicates the LAG number.
•
Description—Provides a user-defined LAG description.
•
LAG Type—Indicates the LAG maximum speed capacity.
•
Admin Status—Controls the traffic from the selected LAG. By default, this parameter
is set to Up. The possible field values are:
–
Up—Enables traffic forwarding through the LAG.
–
Down—Disables traffic forwarding through the LAG.
Configuring Switch Infor mation
217