Dell PowerConnect 3324 User Manual page 228

Deleting a copy port from a port mirroring session:
Open the Port Mirroring page.
1
Check the Remove check box.
2
Click Apply Changes. The port mirroring session is deleted, and the device is updated.
3
Configuring a Port Mirroring Session Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring a Port
Mirroring session as displayed in the Port Mirroring page.
CLI Command
port monitor src-interface [rx
| tx]
show ports monitor
The following is an example of the CLI commands:
Console(config)# interface ethernet 1/e1
Console(config-if)# port monitor 1/e8
Console# show ports monitor
Source portDestination PortTypeStatus
---------------------------------------
1/e11/e8 RX, TXActive
1/e21/e8 RXActive
228 Configuring Switch Infor m ation
Description
Displays the port copy status.
Starts a port monitoring session.