Multi-Effects Settings; Chorus Settings; Reverb Settings - Roland XV-5050 Owner's Manual

Chapter 4 Using the XV-5050 Effects

Multi-Effects Settings

Parameter
EFFECTS MFX
Source Multi-Effects Source
Type Multi-Effects Type
Ctrl Src 1–4 Multi-Effects Control
Source 1–4
Ctrl Dest 1–4 Multi-Effects Control
Destination 1–4
Ctrl Sens 1–4 Multi-Effects Control
Sensitivity 1–4
Output Asgn Multi-Effects Output
Assign
Output Dry Multi-Effects Dry
Send Send Level
Output Cho Multi-Effects Chorus
Send Send Level
Output Rev Multi-Effects Reverb
Send Send Level

Chorus Settings

Parameter
EFFECTS CHO
Source Chorus Source
Type Chorus Type
Output Asgn Chorus Output Assign
Level Chorus Level
Out Select Chorus Output Select

Reverb Settings

Parameter
EFFECTS REV
Source Reverb Source
Type Reverb Type
Output Asgn Reverb Output Assign
Level Reverb Level
74
Value Description
PERFORM, PART 1–16 Selects the Multi-effects parameter settings that will be used by the Performance. If you
wish to use the Performance settings, select PERFORM. If you wish to use the settings of
the Patch/Rhythm Set assigned to one of the Parts, select the Part number.
00 (THROUGH) –90 Use this parameter to select from among the 90 available Multi-effects.
* For details on Multi-effects parameters, refer to "Multi-Effects Parameters" (p. 75).
OFF, CC01–31, CC33–95, Selects the Control Source to be used for changing the Multi-effects parameters.
BEND, AFTER, SYS1–4
Refer to "Multi-Effects Selects the Multi-effects parameter to be controlled using Ctrl Src 1–4. The parameters
Parameters" (p. 75). that can be selected depend on which type of Multi-effects is set to MFX Type.
-63– +63 If you wish to modify the selected parameter in a positive (+) direction—i.e., a higher val-
ue, toward the right, or faster, etc.—from its current setting, select a positive (+) value. If
you wish to modify the selected parameter in a negative (-) direction—i.e., a lower value,
toward the left, or slower, etc.—from its current setting, select a negative (-) value. Higher
numbers produce a greater amount of change.
OUTPUT A/B Adjusts the output destination of the sound that has passed through the Multi-effects.
OUTPUT A: Output to the OUTPUT A (MIX) jacks in stereo.
OUTPUT B: Output to the OUTPUT B jacks in stereo.
0–127 Adjusts the volume of the sound that has passed through the Multi-effects.
0–127 Adjusts the amount of Chorus for the sound that passes through Multi-effects. If you
don't want to add the Chorus effect, set it to 0.
0–127 Adjusts the amount of Reverb for the sound that passes through Multi-effects. If you
don't want to add the Reverb effect, set it to 0.
Value Description
PERFORM, PART 1–16 Selects the Chorus parameter settings that will be used by the Performance. If you wish
to use the Performance settings, select PERFORM. If you wish to use the settings of the
Patch/Rhythm Set assigned to one of the Parts, select the Part number.
OFF, CHORUS, DELAY, Selects either Chorus or Delay.
GM2 CHORUS
* For details on Chorus parameters, refer to "Chorus Parameters" (p. 102).
OUTPUT A/B Selects the pair of OUTPUT jacks to which the Chorus sound is routed when Chorus
Output Select is set to MAIN or MAIN+REV.
0–127 Adjusts the volume of the sound that has passed through chorus.
MAIN, REV, Specifies how the sound routed through Chorus will be output.
MAIN+REV
Value Description
PERFORM, PART 1–16 Selects the Reverb parameter settings that will be used by the Performance. If you
wish to use the Performance settings, select PERFORM. If you wish to use the settings
of the Patch/Rhythm Set assigned to one of the Parts, select the Part number.
OFF, REVERB, SRV ROOM, Selects the type of Reverb.
SRV HALL, SRV PLATE,
* For details on Reverb parameters, refer to "Reverb Parameters" (p. 103).
GM2 REVERB
OUTPUT A/B Specifies how the sound routed through Reverb will be output.
0–127 Adjusts the volume of the sound that has passed through Reverb.
OUTPUT A: Output to the OUTPUT A (MIX) jacks in stereo.
OUTPUT B: Output to the OUTPUT B jacks in stereo.
MAIN: Output to the OUTPUT jacks in stereo.
REV: Output to Reverb in mono.
MAIN+REV: Output to the OUTPUT jacks in stereo, and to Reverb in mono.
OUTPUT A: Output to the OUTPUT A (MIX) jacks in stereo.
OUTPUT B: Output to the OUTPUT B jacks in stereo.