Adjusting Effect Settings; Saving Performances You Create; Copying Settings From One Part To Another (Performance Part Copy) - Roland XV-5050 Owner's Manual

Chapter 3 Creating a Performance

Adjusting Effect Settings

Refer to "Performance Mode Settings" (p. 72).
Saving Performances You
Create
Refer to "Saving a Performance" (p. 104).
Copying Settings from One
Part to Another
(Performance Part Copy)
Part settings from any Performance can be copied to the currently
selected Part. This can save you time when setting up Parts.
1. Make sure that a Part is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] some times to move the cursor to the
upper left of the display.
4. Turn [VALUE] to choose "COPY PART."
5. Press [CURSOR
] twice to move the cursor to the lower
right of the display.
6. Turn [VALUE] to choose the Performance containing the
Part whose settings you wish to copy.
"TEMP" means the currently selected Performance.
7. Use [
CURSOR]/[CURSOR
the Part whose settings you want to copy (From) and the
Part to which you want to copy those settings (To).
8. Press [ENTER] to execute the Copy.
* To cancel, press [EXIT].
9. Press [EXIT] to return to the PERFORM PLAY screen.
A "*" symbol appears at the left of the Performance name,
indicating that the Copy has been executed.
68
] and [VALUE] to select
Performance Name Copy
You can copy the name from any Performance to the current
Performance.
1. Select the Performance whose name you want to
change.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] some times to move the cursor to
the upper left of the display.
4. Turn [VALUE] to choose "COPY NAME."
5. Press [CURSOR
] to move the cursor to the lower
right of the display.
6. Turn [VALUE] to choose the desired Performance
whose name you wish to copy.
7. Press [ENTER] to execute the Copy.
* To cancel, press [EXIT].
8. Press [EXIT] to return to the PERFORM PLAY screen.