Chapter 5 Saving A Sound You Create; Saving Edits To The Xv-5050'S Internal Memory (Write); Saving A Patch (Patch Write); Saving A Rhythm Set - Roland XV-5050 Owner's Manual

Chapter 5 Saving a Sound You Create

Saving Edits to the XV-5050's
Internal Memory (WRITE)
If you turn the power off or select another Patch, Rhythm Set, or
Performance after you have modified a Patch, Rhythm Set or
Performance, the changes you have made will be lost. If you wish to
preserve the data, store it into the XV-5050's USER memory.
Internal Write Protect
The Internal Write Protect setting is provided to help prevent
the accidental overwriting of data in the USER memory. When
saving new data to the USER memory, you must turn off
Internal Write Protect. If you attempt to write data when it is
on, the following display will appear.
fig.05-01
Change the displayed ON to OFF and press [ENTER] to turn
Internal Write Protect off. Press [ENTER] once again, and the
data will be written into the USER memory.
Once you disable Internal Write Protect, it will remain disabled
until the XV-5050's power is turned off.

Saving a Patch (PATCH WRITE)

1. Make sure that the Patch you wish to save is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
upper left of the display.
4. Turn [VALUE] to select "WRITE PATCH."
5. Press [CURSOR
] to move the cursor to the lower right of
the display.
6. Turn [VALUE] to select the number of the memory location
in which you wish to save the Patch (USER area).
7. Press [ENTER] to save the Patch.
* To cancel the procedure, press [EXIT].
8. Press [EXIT] to return to the PATCH PLAY screen.
By holding down [SHIFT] and pressing [UTILITY], you can
move directly to the PATCH WRITE screen.
104

Saving a Rhythm Set

1. Make sure that the Rhythm Set you wish to save is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
upper left of the display.
4. Turn [VALUE] to select "WRITE RHYTHM."
5. Press [CURSOR
] to move the cursor to the lower right of
the display.
6. Turn [VALUE] to select the number of the memory location
in which you wish to save the Rhythm Set (USER area).
7. Press [ENTER] to save the Rhythm Set.
* To cancel the procedure, press [EXIT].
8. Press [EXIT] to return to the RHYTHM PLAY screen.
By holding down [SHIFT] and pressing [UTILITY], you can
move directly to the RHYTHM WRITE screen.

Saving a Performance

1. Make sure that Performance you wish to save is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
upper left of the display.
4. Turn [VALUE] to select "WRITE PERFORM."
5. Press [CURSOR
] to move the cursor to the lower right of
the display.
6. Turn [VALUE] to select the number of the memory location
in which you wish to save the Performance (USER area).
7. Press [ENTER] to save the Performance.
* To cancel the procedure, press [EXIT].
8. Press [EXIT] to return to the PERFORM PLAY screen.
By holding down [SHIFT] and pressing [UTILITY], you can
move directly to the PERFORM WRITE screen.
If you change a Patch's/Rhythm Set's settings without having saved
the Patch/Rhythm Set, and then attempt to save the Performance,
tho following message appears in the display.
When you press [ENTER], the settings of the Performance alone are
saved; changes in the settings of Patches/Rhythm Sets will not be
saved. If you do want to save the settings of Patches/Rhythm Sets,
press [EXIT], save the Patch or Rhythm Set with its changed settings
first, and then save the Performance.