Error Messages - Roland XV-5050 Owner's Manual

Error Messages

If there has been a mistake in operation, or if the XV-5050 is unable to continue processing as you directed,
an error message will appear in the display. Take the appropriate action for the displayed error message.
* This section gives the error messages in alphabetical order.
Message Situation
Due to an inordinate volume of MIDI messages received, the
MIDI Buffer Full
XV-5050 has failed to process them properly.
It is possible that the power has been turned off for the MIDI
MIDI Communication
Error device connected to the XV-5050's MIDI IN connector.
It is possible that a MIDI cable has been pulled out or has a
short.
Receive Data Error A MIDI message was received incorrectly.
USB Off Line It is possible that the power has been turned off for the comput-
er connected to the XV-5050's USB connector.
It is possible that a USB cable has been pulled out or has a short.
User Memory Damaged The data in user memory has been lost.
User Memory Write The Internal parameter (PROTECT; p. 105) is turned ON.
Protected The Exclusive parameter (PROTECT; p. 105) is turned ON, and
Exclusive messages cannot be received.
Action
Reduce the amount of MIDI messages to be
transmitted.
Check the power of the connected MIDI device.
Check the MIDI cable.
If the same error message is displayed repeated-
ly, there is a problem with the MIDI messages
that are being transmitted to the XV-5050.
Check the power of the connected computer.
Check the USB cable.
Use the Factory Reset function (p. 15) to initialize
the memory to the factory settings.
Turn the Internal parameter OFF.
Turn the Exclusive parameter OFF.
137